[Backpack Brain]

I’ll be sharing my top picks for inline RV water filters, with quick reviews to help you get a feel for each one. After that, I’ll dive into what I think are the key factors you should consider when choosing the right filter for your setup. I’d love to know which filters you trust and why!

Top 3 RV Water Filters

• Camco TastePURE RV Water Filter
• Culligan RV-800 Exterior Pre-Tank Recreational Vehicle Water Filter
• Boogie Blue Plus Water Filter

[Backpack Brain]

Camco TastePURE RV Water Filter

The Camco TastePURE RV Water Filter is one of those essentials I didn’t realize I needed until I tasted the difference. When you’re RVing, water quality can be hit or miss depending on where you park for the night. This inline water filter is a game-changer, and I now always keep a couple of these in my gear stash. Here’s why.

First off, installation was a breeze. I’m not one to mess around with complicated setups, especially when I just want to relax at a campsite. The Camco filter easily connects to the water hose in a matter of minutes, and it’s good to go. No tools needed! I’ve used it in multiple campgrounds where the water quality was questionable, and it’s consistently filtered out those unwanted tastes and smells you sometimes get from well water or older hookups.

What I really love about the TastePURE is its KDF (Kinetic Degradation Fluxion) carbon filtration system, which reduces bad tastes, odors, chlorine, and even sediment. I’ve noticed a big improvement in water clarity—no more murky, metallic-tasting water! This is a huge win when you’re filling up water bottles, washing dishes, or even just showering. I feel a lot better knowing my water is clean, especially when cooking or making coffee in the morning.

Another thing that stands out for me is how long this filter lasts. It’s rated for up to 3 months, and while that depends on how often you use it, I’ve gotten some solid mileage out of it before needing a replacement. Plus, the TastePURE RV Water Filter has a larger capacity than some of the smaller filters out there, which means you won’t have to swap it out as frequently.

That said, I’ve used this filter across different climates—from humid coastal campsites to desert RV parks—and it’s held up just fine. The construction feels solid, and the filter doesn’t clog or slow down the water flow like some cheaper options can. I also appreciate the built-in flexible hose protector that helps prevent any strain or kinks in the line.

If I had one small gripe, it would be that it’s not a permanent solution—you’ll need to replace it every few months. But for the price point and convenience, I honestly don’t mind keeping an extra one in my storage just in case.

Overall, the Camco TastePURE RV Water Filter has made RV life so much better when it comes to clean, great-tasting water. If you’re tired of funky-tasting water and want something that’s reliable, easy to install, and won’t break the bank, this filter is a no-brainer. I’d love to hear if anyone else has tried it and how it’s worked for you!

[Backpack Brain]

Culligan RV-800 Exterior Pre-Tank Recreational Vehicle Water Filter

The Culligan RV-800 Exterior Pre-Tank Water Filter has quickly become one of my go-to solutions for ensuring clean, fresh water when I’m out RVing. If you’ve ever dealt with less-than-ideal water hookups at campgrounds, you know how important it is to have a reliable filtration system. And trust me, the Culligan RV-800 delivers.

One of the first things I appreciated about this filter is its design—it’s built specifically for RVs and designed to connect before the water enters your holding tank. This means you’re filtering water before it has a chance to flow through your pipes, giving you peace of mind right from the get-go. The installation process is simple, too. Like the Camco, it’s an inline filter, so all you need to do is hook it up between the hose and your water intake. No fuss, no extra tools, and you’re ready to go.

I noticed an immediate improvement in the taste and smell of the water after installing the Culligan RV-800. It uses a granular activated carbon filter to reduce chlorine, sediment, and other contaminants. If you’ve ever filled up from a source that tasted a little too much like a swimming pool, you’ll appreciate this! It really takes that chlorine taste out of the equation and leaves the water tasting clean and crisp. I’m pretty particular about my coffee in the mornings, so having filtered water makes a noticeable difference in flavor.

Durability-wise, this filter is built to last. I’ve had it hooked up during hot summer days and cooler nights without any issues. The housing is sturdy, and I haven’t experienced any leaks or drops in water pressure. Speaking of water pressure, one of my concerns was whether this filter would slow down the flow, but I’m happy to report it didn’t at all. It keeps the water flowing smoothly, even when I’m running the sink, shower, and filling up the kettle all at once.

What sets the Culligan RV-800 apart from some other options is the longevity of the filter. It’s designed to handle up to 2,000 gallons or 3 months of continuous use, which for me means less frequent replacements—definitely a plus when you’re on the road and don’t want to be swapping filters every other week.

Now, one thing to keep in mind is that this filter is a bit larger compared to some compact inline filters, so you’ll want to make sure you have enough room to store it when it’s not in use. But given how effective it is at keeping my RV’s water supply clean, it’s a trade-off I’m more than happy to make.

If you’re looking for a filter that’s reliable, easy to use, and really does a great job filtering out contaminants while maintaining water pressure, the Culligan RV-800 Exterior Pre-Tank Recreational Vehicle Water Filter is a fantastic option. Whether you’re heading to the desert or a wooded lakeside campground, it’s definitely one filter that makes a noticeable difference. Let me know if you’ve tried it and how it’s worked for you!

[Backpack Brain]

Boogie Blue Plus Water Filter

The Boogie Blue Plus Water Filter is one of those products that truly surprised me with its versatility and performance, especially for RV use. I first came across this filter when I was looking for something that could handle more than just the basics—like chlorine and sediment—and also filter out things like pesticides and heavy metals. And let me tell you, it hasn’t disappointed!

Right off the bat, what stood out to me was how easy it was to set up. It’s an inline filter, so it connects directly to your RV’s water hose with zero hassle. I was up and running in minutes, which is always a win when you’re eager to settle into a new campsite. No tools needed and no complicated instructions—just plug it in, and you’re good to go. I love that it’s simple enough for anyone to use, whether you’re a weekend camper or a full-time RVer.

What really sets the Boogie Blue Plus apart from some of the other inline RV water filters I’ve tried is its ability to filter out a wider range of contaminants. It’s specifically designed to remove not just chlorine, but also chloramines, volatile organic compounds (VOCs), and heavy metals, which is a huge plus when you’re pulling into an unfamiliar RV park with questionable water quality. I’ve even used it when I’m camping at farms or rural spots where the water might be exposed to agricultural runoff, and the peace of mind it provides is unbeatable.

As someone who is pretty particular about water quality (especially when it comes to drinking and cooking), the difference is noticeable. The water tastes clean, crisp, and free of any odd flavors or odors. I’ve even run my plants off of this water when we’re camping in more natural settings, knowing that it filters out those harmful chemicals that could otherwise accumulate in the soil.

The filter is rated for up to 45,000 gallons, which is far more than most RV water filters. This makes it a fantastic option for long-term RVers or even those who enjoy extended boondocking trips where you’re more dependent on filtration. You don’t have to worry about swapping it out constantly, which is a nice bonus when you’re on the road and want a low-maintenance solution.

One thing to be aware of is its slightly larger size compared to more compact filters like the Camco or Culligan. But honestly, the filtration power makes the size worth it. I just keep it tucked away when not in use, and it’s been no problem at all. The build quality feels solid too—it’s sturdy, and I haven’t noticed any leaks or loss of pressure since I started using it.

If I had to sum it up, the Boogie Blue Plus Water Filter is perfect for RVers who are looking for a heavy-duty filter that can handle a variety of contaminants without compromising on taste or performance. It’s not just a great option for your RV but also if you’re filling up water tanks, gardening, or even using it on an outdoor shower setup. I’d love to hear if anyone else has tried it and what you think—especially if you’ve used it in more off-the-grid spots like I have!

[Backpack Brain]

Best Inline RV Water Filters: A Buyer’s Guide

Finding the perfect inline RV water filter can feel like a bit of a journey, but trust me—it’s worth it. Clean water is a necessity on the road, whether you’re brewing coffee, washing dishes, or taking a shower after a long hike. Here’s a guide to help you choose the best inline RV water filter, based on my experiences and what I think really matters when you’re out exploring.

Price
Let’s start with the obvious—price. Inline RV water filters range anywhere from budget-friendly models around $15-$20 to higher-end options that can cost $50 or more. I’ve found that the cheaper filters often work well enough for short trips, but if you’re a full-timer or take longer adventures, investing in a mid-range or premium filter can save you in the long run. The more expensive options often come with added filtration capabilities, better flow rates, and last longer—so it’s not just about the upfront cost, but also the overall value.

Ease of Use/Installation
One of the things I love about inline RV water filters is how simple they are to install. Most models don’t require any tools and connect directly between your water hose and the RV. Even for someone like me, who’s not exactly the most handy person, it’s a quick and painless process. Look for filters that come with clear instructions and minimal setup hassle. Some even come with hose protectors to prevent kinks, which is a nice bonus. If you’re someone who likes to get up and running quickly at a campsite, ease of installation should definitely be on your radar.

National Sanitation Foundation (NSF)
When it comes to water safety, having a filter that’s certified by the National Sanitation Foundation (NSF) is crucial. NSF certification ensures the filter meets strict safety and performance standards, which means it’s capable of effectively removing contaminants. I always check for NSF certification on any filter I’m considering—it gives me peace of mind knowing my water is safe to drink, especially when pulling into less-than-ideal campgrounds with older water hookups.

What’s in Your Water?
Different filters are designed to tackle various contaminants, so it’s important to know what you’re filtering out. Most RV water filters will handle basics like chlorine and sediment, but if you’re camping in rural areas or near agricultural sites, you might also want a filter that handles pesticides, VOCs (volatile organic compounds), or even heavy metals. Personally, I like to go for a filter that can handle a wide range of contaminants, just to be safe. It’s always good to check out what’s in the water supply where you’ll be staying and match it with the filter’s capabilities.

Flow Rate – Amount of Water Needed
Flow rate is one of those things that can really make or break your experience with an RV water filter. Filters with low flow rates can slow down your water pressure, which can get frustrating when you’re trying to fill up the tank, take a shower, or run multiple appliances at once. Most RV inline filters have flow rates between 1.5 and 3 gallons per minute (GPM). If you’re traveling with a family or use a lot of water at once, I’d recommend going for a higher flow rate—this keeps everything moving smoothly, from the kitchen sink to the outdoor shower.

Micron Ratings
The micron rating is a key factor in any water filter’s effectiveness. The smaller the micron rating, the finer the filtration. For example, a filter with a rating of 5 microns will capture larger particles, while a filter with a rating of 1 micron will capture even finer contaminants like bacteria and cysts. Personally, I think a 5-micron filter works great for most RV water systems, especially if you’re mainly concerned with sediment, chlorine, and bad tastes. But if you’re going to be in areas where the water quality is really questionable, a 1-micron filter might be a better option.

Filter Size
Filter size might not be something you think about at first, but it’s important, especially if you’re tight on space or plan to store the filter when not in use. Some filters, like the Camco TastePURE, are compact and easy to stash, while others, like the Boogie Blue Plus, are bulkier but offer more filtration power. I’ve found that smaller filters are great for short trips or when I’m hopping between campgrounds, while larger filters are better suited for extended stays or boondocking.

Water Filter Style
Inline RV water filters come in a few different styles, and the one you choose depends on your specific needs. The most common type is a basic inline filter that connects directly to your hose. These are ideal for on-the-go filtering and are super easy to use. Then you’ve got more advanced models that may include pre-tank filtration (like the Culligan RV-800), which filters water before it even enters your RV’s holding tank. These offer more comprehensive filtration and help keep your system cleaner in the long run.

Some filters even come with flexible hose attachments or built-in regulators to ensure a smooth water flow. The style you choose should align with how much water filtration you need and how you plan to use it. Personally, I like a straightforward inline filter that I can set and forget, but if you’re someone who wants that extra layer of protection, a pre-tank model might be your best bet.

[Author]

Posts